Drawmer DL231 Dual Expander/Compressor - Manual (Page 10)

DL231 OPERATORS MANUAL 8
TECHNICAL SPECIFICATIONS
(Measurements taken at +4dBu operating level where applicable)
INPUT IMPEDANCE 20KOhm
BANDWIDTH 20Hz - 22KHz (1dB)
MAXIMUM OUTPUT LEVEL +24dBm (Electronic - floating)
+22dBm (Unbalanced)
SIDE CHAIN Send/Return Unbal, in phase input pin 2.
NOISE @ UNITY GAIN (Referred to +4dBm) Expander off.
Wideband !83dB
22Hz-22KHz !90dB
CCIR ARM !91dB
IEC A !94dB
Q. Pk CCIR !80dB
DISTORTION 100Hz 1KHz 10KHz
Unity gain +4dBm Input 0.025% 0.025% 0.025%
+14dBm input 10dB GR. 0.03% 0.03% 0.06%
COMPRESSOR
Threshold -24dB to infinity (ref +4dBm)
Ratio Variable 1:1 to 20:1
Attack 50µS to 5mS
Release 50mS to 5 Sec
Output Gain -20dB to +20dB
EXPANDER
Threshold -40dB to +10dB
Ratio 1:1, 1:2, 1:20 Switchable
Attenuation (Attn) 10, 20 or 40dB Switchable
Attack Fully automatic 50µS to 10mS
Release Related to compressor release and
programme content.
PEAK LIMITER
Threshold +6dB (ref +4dB)
Ratio 50:1
Attack 50µS
Release Automatic
STEREO TRACKING within 1dB to 20dB GR.
within 3dB to 40dB GR.
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 9 Watts
FUSE RATING 63mA for 230Volt, 125mA for 115Volt
Conforming to IEC127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3 Kgs