Drawmer MC2.1 Monitor Controller - Manual (Page 23)

2 3 MC2.1 - Monitor Controller
CHAPTER 3
SPECIFICATION
Note: These specfications are provisional
and may alter slightly upon produc t
release.
INPUT
Maximum Input Level 21dBu
OUTPUT
Maximum Output Level
before clipping
27dBu
DYNAMIC RANGE
@ unity gain
118dB
CROSSTALK
L/R @ 1kHz
>85dB
Adjacent Input >95dB
THD & NOISE
unity gain 0dBu input
0,0014%
FREQUENCY RESPONCE
20Hz-20kHz
+/- 0.2dB
PHASE RESPONSE
20Hz-20kHz
+/- 2degrees max
POWER REQUIREMENTS
115V or 230V at 50-60Hz, 20VA
Voltage set by internal voltage switch
FUSE RATING
@ 115V
T315mA
@ 230V T160mA
Conforming to IEC 127-2
FUSE TYPE
20mm x 5mm, Class 3 Slo-Blo,
250Volt working
CASE SIZE
Depth (with Controls
& Sockets)
272mm
Width 215mm
Height (with Feet) 81mm
WEIGHT 2.5kg
For warranty service please call Drawmer
Electronics Ltd. or their nearest authorised
service facility, giving full details of the difficulty.
A list of all main dealers can be found on the
D rawmer webpages . On receipt of this
information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the
warranty without prior consent from Drawmer
or their authorised representative.
For s ervic e c laims under the warrant y
agreement a service Returns Authorisation
(RA) number will be issued.
W rite this RA number in large letters in a
prominent pos ition on the shipping box.
Enc lose your name, addres s, telephone
number, copy of the original sales invoice and
a detailed description of the problem.
Authorised returns should be prepaid and must
be insured.
All Dr awmer produc ts are pac kaged in
specially designed containers for protection.
If the unit is to be returned, the original
container must be used. If this container is not
available, then the equipment s hould be
packaged in substantial shock-proof material,
capable of withstanding the handling for the
transit.
CONTACTING
DRAWMER
We will be pleased to answer all application
questions to enhance your usage of Drawmer
equipment.
Please address correspondence to:
DRAWMER Electronics LTD
Coleman Street
Parkgate
Rotherham
South Yorkshire
S62 6EL
United Kingdom
Telephone: +44 (0) 1709 527574
Fax:
+44 (0) 1709 526871
Contact via E-mail: [email protected]
Further information on all Drawmer products,
dealers, Authorised service departments
and other contact information can be found
on our website: www.drawmer.com
MC2.1 GENERAL INFORMATION
IF A FAULT DEVELOPS