beautypg.com

Normal starting – Dodge 2012 Challenger User Manual

Page 257

background image

Removing The Button

1. The ENGINE START/STOP button can be removed
from the ignition switch for key fob use.

2. Insert the metal part of the emergency key under the
chrome bezel at the 6 o’clock position and gently pry the
button loose.

NOTE:

The ENGINE START/STOP button should only

be removed or inserted with the ignition in the OFF
position.

Normal Starting

Using The ENGINE START/STOP Button –
Automatic Transmission Only

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

To start the engine, the transmission must be in PARK or
NEUTRAL. Press and hold the brake pedal while press-
ing the ENGINE START/STOP button once. The system
takes over and attempts to start the vehicle. If the vehicle
fails to start, the starter will disengage automatically after
10 seconds. If you wish to stop the cranking of the engine
prior to the engine starting, press the button again.

Using The ENGINE START/STOP Button –
Manual Transmission Only

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

To start the engine, press and hold the clutch pedal while
pressing and holding the ENGINE START/STOP button.
Release the button when the engine starts. If the vehicle
fails to start within 15 seconds, release the button, wait 10

5

STARTING AND OPERATING

255