Crane Song IBIS - Manual (Page 12)

INTERFACING - SPECIFICATIONS
Input: Floating, balanced. Maximum input is +25 dBm.
The connectors are XLR.
Output: Floating, balanced. Maximum output is +25 dBm.
The connectors are XLR.
Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND
Connections
Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts
MDL .6A Fuse for 100V and 120V
MDL .3A Fuse for 230V and 240V
Noise: Measured with the eq set flat and the bandwith controls at max
-85dbm
Clipping: +25 dbm
Distortion: With the eq set flat measured at +20 dbm 0.001%
Pilot Lamp: # 327
Shipping
Weight:
19 lbs. (8.6 kg)
Depth
Behind Panel:
12.5 inches (31.75 cm) plus cabling
Panel Height: 2 rack spaces
Frequencies: There are 24 frequencies per band for a total of 96 frequenices
with the bands overlapping. They are stepped on both the mastering
and standard units
Boost-Cut: The standard equalizer has a range to plus or minus 12 db on each
band. The Mastering version has a range of plus or minus 6 db
This is stepped 0.5 db steps to 5 db and a 1 db step to 6db on the
mastering version.
Bandwith: Bandwidth in octaves is measured at full boost. The maximun is 4
octaves and a minimun is 0.2 octaves. This is a Q range from 0.15 to
17 On the mastering unit this is stepped with 12 steps.