CLEAR PC Card - Manual (Page 8)

Installing and using Clearwire pc card 5
Figure 9 Enable or Disable pc card using the System Tray icon menu
Searching for signal
Signal Strength
Managing your Clearwire pc card connection
You may want to disable the pc card connection to use your WiFi network.
To enable or disable the pc card connection:
1 Right click on the System Tray Connection icon.
2 Select one of the following depending on your state:
• Enable -- To use the pc card to connect to the Clearwire network.
• Disable -- To disable the pc card connection.
Note : To enable your Wi-Fi connection manually, use the Windows control panel.
Finding signal
When your pc card is enabled, it will go out to the network to find a signal from a near by
base station antenna. You can monitor its progress from the Signal Strength window.
1 Open the Signal Strength window:
Click on the System Tray Connection icon.
2 View the status of your pc card