CLEAR Hub Express Users Guide - Manual (Page 21)

20
x Dynamic DNS Information (Domain Name Service): This is a mechanism used for translating
host names for network nodes into IP Addresses in real time. Use these fields to configure a
Dynamic DNS service.
x Enable DDNS: Allows you to enable Dynamic DNS.
x DDNS Service Provider: Select the type of service provider that is used.
Manage your CLEAR Hub Express (continued)
CLEAR Hub Express Home Page / Advanced Settings / Router (continued)
x Universal PnP: Universal Plug and Play (UPnP) Internet Gateway Device (IGD) is a protocol that
simplifies device connection and network implementation. When this option is enabled, certain
Windows applications would setup the Port Forwarding rule dynamically.
x Enable UPnP IGD: Allows you to enable UPnP IGD, if any.
x DMZ Host: Put a device connected to the CLEAR Hub Express in the DMZ (Demilitarized Zone)
so that the device can be accessed by external hosts.
x Configuring this option requires entering the IP Address of the host.
x Port Forwarding: This allows you to forward specific external ports to host devices connected to
the CLEAR Hub Express.
x Add: Enter the host IP Addresses and the port to be forwarded in order to set up the route.
x Delete: Select items to delete in order to cancel the route.