Chrysler 2014 200 - User Guide - Manual (Page 94)

OPENING THE HOOD
1. Pull the release lever located below the in-
strument panel and in front of the driver’s
door.
2. Raise the hood and locate the safety latch,
in the middle of the hood opening.
3. Move the safety latch while lifting the hood
at the same time.
4. Insert the support rod into the slot on the
hood.
5. To close the hood, remove the support rod
and place it in the retaining clip, then lower
the hood slowly.
WARNING!
Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it
could open when the vehicle is in motion and block your vision. Failure to follow this warning
could result in serious injury or death.
M A I N T A I N I N G Y O U R V E H I C L E
92