Enhanced seat belt use reminder system, Beltalert – Chrysler 2012 200 - Owner Manual User Manual
Page 58
4. The AHR front soft foam and trim half should lock
into the back decorative plastic half.
NOTE:
• If you have difficulties or problems resetting the
Active Head Restraints, see an authorized dealer.
• For safety reasons, have the Active Head Restraints
checked by a qualified specialist at an authorized
dealer.
Enhanced Seat Belt Use Reminder System
(BeltAlert
ா
)
BeltAlert
is a feature intended to remind the driver and
front passenger (if equipped with front passenger
BeltAlert
) to fasten their seat belts. The feature is active
whenever the ignition is on. If the driver or front seat
passenger is unbelted, the Seat Belt Reminder Light will
turn on and remain on until both front seat belts are
fastened.
The BeltAlert
warning sequence begins after the vehicle
speed is over 5 mph (8 km/h), by blinking the Seat Belt
Reminder Light and sounding an intermittent chime.
Once the sequence starts, it will continue for the entire
duration or until the respective seatbelts are fastened.
After the sequence completes, the Seat Belt Reminder
AHR In Reset Position
56
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE