Chrysler 2012 200 - Owner Manual - Manual (Page 310)

Shifting from DRIVE to PARK or REVERSE should be
done only after the accelerator pedal is released and the
vehicle is stopped. Be sure to keep your foot on the brake
pedal when moving the shift lever between these gears.
The transmission shift lever has PARK, REVERSE, NEU-
TRAL, DRIVE, and AutoStick
௡ shift positions. Manual
shifts can be made using the AutoStick
௡ shift control
(refer to “AutoStick ௡” in “Starting And Operating” for
further information). Moving the shift lever to the left or
right (-/+) while in the AutoStick
௡ position (below the
Drive position) will manually select the transmission
gear, and will display the current gear in the instrument
cluster as 6, 5, 4, 3, 2, 1.
Gear Ranges
DO NOT race the engine when shifting from PARK or
NEUTRAL into another gear range.
Shift Lever
308 STARTING AND OPERATING