Chrysler 2010 Country - User Guide - Manual (Page 74)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant 3.3L,
3.8L, 4.0L MOPAR ® Antifreeze/Coolant Five
Year/100,000 Mile Formula HOAT
(Hybrid Organic Additive
Technology) or equivalent.
13.4 Quarts
(12.6 Liters) Includes
heater and coolant
recovery bottle filled
to MAX level. Add
2.9 Quarts (2.8 Liters)
if equipped with rear
heater.
Engine Oil with Filter
3.3L, 3.8L API certified 5W-20 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your oil filler cap
for correct SAE grade. 5 Quarts (4.7 Liters)
Engine Oil with Filter
4.0L API certified 10W-30 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your oil filler cap
for correct SAE grade. 5.5 Quarts (5.2 Liters)
Fuel Selection 3.3L,
3.8L 87 Octane 20 Gallons (76 Liters)
Fuel Selection 4.0L 87 Octane acceptable – 89
Recommended. 20 Gallons (76 Liters)
Engine Oil Filter 3.3L,
3.8L MOPAR ® Engine Oil Filter or
equivalent.
—
Engine Oil Filter 4.0L MOPAR ® Engine Oil Filter or
equivalent.
—
Spark Plug 3.3L, 3.8L RE14PLP5 (Gap 0.050 in [1.27 mm]) —
Spark Plugs 4.0L ZFR5LP-13G (Gap 0.050 in
[1.27 mm])
—
Automatic Transaxle MOPAR ® ATF+4 ® Automatic
Transmission Fluid or equivalent
licensed ATF+4
® product.
—
Brake Master Cylinder MOPAR ® DOT 3 and SAE J1703
should be used or equivalent. If
DOT 3 is not available, then DOT 4
is acceptable. Use only
recommended brake fluids.
—
Power Steering
Reservoir MOPAR ® Power Steering Fluid +4
or MOPAR ® ATF+4 ® Automatic
Transmission Fluid or equivalent
licensed ATF+4
® product.
—
MAINTAINING YOUR VEHICLE
72