Chassis – Chrysler 2010 Sebring - Owner Manual User Manual
Page 395
Component
Fluid, Lubricant, or Genuine Part
Spark Plugs – 2.7L Engine
TE10PMC5 (Gap 0.050 in [1.27 mm])
Spark Plugs – 3.5L Engine
ZFR5LP-13G (Gap 0.050 in [1.27 mm])
Fuel Selection – 2.4L and 2.7L En-
gines
87 Octane
Fuel Selection – 3.5L Engine
87 Octane Acceptable – 89 Octane Recommended
* PZEV = Partial Zero Emission Vehicle
Chassis
Component
Fluid, Lubricant, or Genuine Part
Automatic Transmission
MOPAR
ATF+4 Automatic Transmission Fluid or equivalent licensed
ATF+4
product.
Brake Master Cylinder
MOPAR
DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not
available, then DOT 4 is acceptable. Use only recommended brake fluids.
Power Steering Reservoir
MOPAR
Power Steering Fluid +4, MOPAR ATF+4 Automatic Transmis-
sion Fluid or equivalent licensed ATF+4
product.
394
MAINTAINING YOUR VEHICLE