Chrysler 2010 300 - Owner Manual - Manual (Page 462)

CAUTION!
• When installing the integrated power module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the integrated power
module and possibly result in an electrical system
failure.
• When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
Cavity Car-
tridge
Fuse Mini-
Fuse Description
1 — 15 Amp
Blue Washer Motor
2 — 25 Amp
Neutral Powertrain Control
Module (PCM)
3 — 25 Amp
Neutral Ignition Run/Start
4 — 25 Amp
Neutral Alternator/EGR Sole-
noid
5 — — —
6 — 25 Amp
Neutral Ignition Coils/Injectors/
Short Runner Valve
7 — — —
7
MAINTAINING YOUR VEHICLE 461