Chrysler 2010 300 - Owner Manual - Manual (Page 187)

ParkSense
ா
System Usage Precautions
NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense
௡ Rear Park
Assist system operating properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of the ParkSense ௡ Rear Park
Assist system.
• When you turn ParkSense௡ off, the instrument cluster
will display “PARK ASSIST DISABLED.” Further-
more, once you turn ParkSense
௡ off, it remains off
until you turn it on again, even if you cycle the ignition
key.
• When you move the shift lever to the REVERSE
position and ParkSense ௡ is turned off, the instrument
cluster will display “PARK ASSIST DISABLED” mes-
sage for as long as the vehicle is in REVERSE.
• ParkSense௡, when on, will MUTE the radio when it is
sounding a tone.
• If a ParkSense௡ system malfunction occurs, a single
chime will sound once per ignition cycle. In addition,
the Electronic Vehicle Information Center (EVIC) will
display “SERVICE PARK ASSIST SYSTEM” and the
LED in the ParkSense
௡ switch will illuminate. If this
occurs after making sure the rear fascia/bumper is
clean and clear of snow, ice, mud, dirt, or other
obstruction, see your authorized dealer for service.
• Clean the ParkSense௡ sensors regularly, taking care
not to scratch or damage them. The sensors must not
be covered with ice, snow, slush, mud, dirt, or debris.
Failure to do so can result in ParkSense
௡ not working
properly. The ParkSense ௡ system might not detect an
obstacle behind the fascia/bumper, or it could provide
a false indication that an obstacle is behind the fascia/
bumper.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE