beautypg.com

Driving on slippery surfaces, Acceleration – Chrysler 2009 300 - Owner Manual User Manual

Page 329

background image

vehicle automatically shifts into AWD mode. Automatic
AWD operation could be activated by outside tempera-
ture, wheel slip, or other predetermined conditions (there
may be a slight delay for AWD engagement after a wheel
slip condition occurs). AWD can also be manually se-
lected by moving the shift lever into the Autostick

௡ mode

(+/-) or activating the windshield wipers for an extended
period of time.

NOTE:

If the “t CASE” or “SERVICE AWD SYSTEM”

warning message appears after engine start up, or during
driving, it means that the AWD system is not functioning
properly and that service is required. Refer to “Electronic
Vehicle Information Center” in Section 4 of this manual.

CAUTION!

All wheels must have the same size and type tires.
Unequal tire sizes must not be used. Unequal tire
size may cause failure of the front differential and/or
the transfer case.

DRIVING ON SLIPPERY SURFACES

Acceleration

Rapid acceleration on snow covered, wet, or other slip-
pery surfaces may cause the rear wheels to pull errati-
cally to the right or left. This phenomenon occurs when
there is a difference in the surface traction under the rear
(driving) wheels.

STARTING AND OPERATING

327

5

This manual is related to the following products: