Activating adaptive cruise control (acc) – Chrysler 2009 300 - Owner Manual User Manual
Page 159
![background image](/manuals/671713/159/background.png)
Activating Adaptive Cruise Control (ACC)
You can only activate ACC if the vehicle speed is above
25 mph (40 km/h).
When the system is turned on and in the READY state,
the Electronic Vehicle Information Center (EVIC) dis-
plays “ACC READY.”
When the system is OFF, the EVIC displays “CRUISE
OFF.”
NOTE:
You cannot enable ACC under the following
conditions:
• When you apply the brakes.
• When the parking brake is set.
• When the automatic transmission is in PARK, RE-
VERSE, or NEUTRAL.
• When the Electronic Stability Program (ESP) is
switched off.
• When pushing the RESUME/ACCEL switch without a
previously set speed in memory.
1 — DISTANCE SETTING
2 — CANCEL
3 — RESUME/ACCEL
4 — ON/OFF/MODE
5 — SET/DECEL
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
157
3
This manual is related to the following products: