beautypg.com

Chrysler 2008 300 User Manual

Page 212

background image

driving, turn off some of the vehicle’s non-essential
electrical devices (i.e. radio) or slightly increase engine
speed (if at idle). If the light remains on, it means that the
charging system is experiencing a problem. See your
local authorized dealer to obtain SERVICE IMMEDI-
ATELY.

24. Malfunction Indicator Light

This light is part of an onboard diagnostic system
called OBD. The OBD system monitors engine
and automatic transmission control systems. The

light will turn on when the key is in the ON position
before engine start. If the light does not come on when
turning the key from OFF to ON, have the condition
checked promptly.

Certain conditions such as a loose or missing gas cap,
poor fuel quality, etc. may illuminate the light after
engine start. The vehicle should be serviced if the light

stays on through several of your typical driving cycles. In
most situations, the vehicle will drive normally and will
not require towing.

The Malfunction Indicator Light flashes to alert you to
serious conditions that could lead to immediate loss of
power or severe catalytic converter damage. The vehicle
should be serviced as soon as possible if this occurs. (See
page 417 for more information.)

25. Oil Pressure Warning Light

This light shows low engine oil pressure. The light
should turn on momentarily when the engine is

started. If the light turns on while driving, stop the
vehicle, and shut off the engine as soon as possible. A
single chime will sound when this light turns on.

Do not operate the vehicle until the cause is corrected.
This light does not show how much oil is in the engine.
The engine oil level must be checked using the procedure
shown in section 7. (See page 421 for more information.)

212

UNDERSTANDING YOUR INSTRUMENT PANEL

This manual is related to the following products: