Linking & unlinking the remote keyless, Transmitter to the memory feature – Chrysler 2008 300 User Manual

Page 125

1. Adjust all memory profile settings to desired prefer-
ences (i.e. seat, side mirror, adjustable pedals [if
equipped], power tilt and telescopic steering column [if
equipped], and radio station presets).

2. Press and release the Set (S) button on the memory
switch, then press the side of the rocker switch labeled (1)
within 5 seconds. The Electronic Vehicle Information
Center (EVIC) — if equipped will display which memory
position is being set.

If desired, a second memory profile can be stored into
memory as follows:

2. Press and release the Set (S) button on the memory
switch, then press the side of the rocker switch labeled (2)

within 5 seconds. The Electronic Vehicle Information
Center (EVIC) — if equipped will display which memory
position is being set.

NOTE:

Memory profiles can be set without the vehicle

in Park, but the vehicle must be in Park to recall a
memory profile.

NOTE:

The Recall Memory with Remote Key Unlock

feature can be enabled through the Electronic Vehicle
Information Center (EVIC) — if equipped. For details,
refer to “Personal Settings (Customer Programmable
Features)” under “Electronic Vehicle Information Center
(EVIC)” in Section 4 of this manual.

Linking & Unlinking the Remote Keyless
Transmitter to the Memory Feature

Your Remote Keyless Entry Transmitters can be pro-
grammed to recall one of two pre-programmed memory
profiles by pressing the UNLOCK button on the Remote
Keyless Entry Transmitter.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

125

This manual is related to the following products:

2008 300C