Note, Marking desired scenes, Marking the scenes – RCA LCD L26HD35D User Manual
Page 31: Changing soundtrack language
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A-B Repeat Playback:
A-B repeat playback allows you to repeat material
between two selected points.
1 Press REPEAT A-B during playback.
The start point is selected.
Press REPEAT A-B again.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point, returns to Point A automatically, then starts
again.
3
To resume normal playback press REPEAT A-B
again.
Off ” appears on the screen.
NOTE:
• Some discs may not work with the repeat operation.
• In A-B repeat mode, subtitles near point A or B may
not appear.
• During the A-B Repeat Playback the ANGLE
feature will not operate.
• You may not be able to set A-B Repeat, depending
on the scenes of the DVD.
• A-B Repeat does not work with an interactive DVD,
MP3/WIVIA/JPEG-CD.
Marking desired scenes
The TV/DVD stores the points that you want to
watch again.You can resume piayback from that
scene.
Marking the scenes:
1
Press MARKER during playback.
2
Select the blank Marker using
a
or
t
,
then press
ENTER at the desired scene.
I Marker 1 00
2/
54 1
Marker
2
—
Markers —
• Up to 3 scenes can be selected.
• Repeat this procedure to set the other 2
scenes.
3
Press MARKER to remove this display.
Returning to the scenes:
1
Press MARKER during playback or stop mode.
2
Press A or T to select the Marker 1-3.
Marker 1
00 :27 :54
1 Markers
01 :16 :25 I
Marker 3
02 :08 :31
3 Press ENTER.
Playback starts from the marked scene.
To cancel the mark:
1
Press MARKER during playback or stop mode.
2
Press A or T to select the Marker 1-3.
3
Press CANCEL.
Press MARKER to remove this display.
NOTE:
• The marking is canceled when you eject the disc or
turn the power off.
• Some subtitles recorded around the marker may fail
to appear. [DVD]
Changing soundtrack
language______________
You can select the language when you play a
multilingual disc.
1 Press AUDIO during playback.
The current soundtrack language will appear.
i1/2
Eng Dolby Digita
•
2 Press AUDIO repeatedly until the desired
language is selected.
The on-screen display will disappear after a few
seconds.
NOTE:
• If the desired language is not heard after pressing
AUDIO several times, the language is not recorded
on the disc.
• Changing soundtrack language is cancelled when
you eject the disc.
The initial default language or available language
will be heard if the disc is played back again.
31