Toshiba 79077075 - Manual (Page 39)

AUDIO
Audio Out Select
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see (^.
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder. [T8)[T^
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 6ch: Select when connected to a Dolby
Digital ready amplifier equipped with
5.1ch audio inputs. [Ts)
This DVD video player is equipped with
a Dolby Digital decoder.
The next screen will appear for the
detailed setting.
Analog 2ch: Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks. [i6)pr8)
PCM: Select when connected to a 2 channel
digital stereo amplifier. [T
9
)
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
When you select “Analog 6Ch”:
Make the following settings tor the built-in S.lch
surround decoder.
1 Large 1
C(Center) Speaker PM
S(Surround) Speaker
Subwoofer Em
Cent«' Channel Delay
Surround Channel Delay Egl
TestTofW
1) Select an item by moving the cursor control
(A / T), and press the ENTER button.
2) Make the settings (see below) by moving the
cursor control (A / T / ◄ / ► ), and press the
ENTER button.
C.S.Speaker Size
Small: When the center speakers or surround
speakers cannot reproduce low frequency
signals below 120 Hz.
Large: When the center speakers and surround
speakers can reproduce low frequency
signals below 120 Hz.
C(Center) Speaker
Off: When center speakers are not connected.
On: When you connect center speakers.
S(Surround) Speaker
Off: When surround speakers are not connected.
On: When you connect surround speakers.
Subwoofer
Off: When a sub woofer is not connected.
On: When you connect a sub woofer.
(Continued)
c
o
39