Cabletron Systems 7C04 Workgroup - Manual (Page 6)

1-1
CHAPTER 1
INTRODUCTION
Welcome to Cabletron Systems 7C04 Workgroup SmartSwitch
Chassis User’s Guide . This manual describes the physical
characteristics, specifications, and capabilities of the 7C04
Workgroup SmartSwitch Chassis.
1.1 USING THIS MANUAL
Chapter 1, Introduction , discusses the features of the 7C04
Chassis.
Chapter 2, Installation , explains the 7C04 Chassis’ power supply
module, and how to install that power supply module.
Chapter 3, Troubleshooting , explains the LANVIEW
®
LEDs of the
7C04 Chassis’ power supply module.
Chapter 4, Technical Specifications , explains the location
requirements and operating specifications of the 7C04 Chassis.
1.2 USING THE SMARTSWITCH MANUAL SET
Each SmartSwitch interface module that can be inserted in the
7C04 Chassis is shipped with a module user’s guide. For example,
the
7E03-24 Ethernet SmartSwitch Interface Module User’s Guide
explains the physical characteristics, specifications, and installation
procedures of the 7E03-24 Module.
The management module of the 7C04 Chassis is described in the
7X00 SmartSwitch Controller Module User’s Guide. The user’s guide
explains the 7X00 Module’s physical characteristics, installation
procedures, and how to locally manage the SmartSwitch interface
modules in the chassis.
In addition, any local management information that is specific to a
particular SmartSwitch interface module, is described in a module
specific local management appendix. For example, the
7E03-24
Ethernet SmartSwitch Interface Module Local Management Appendix
explains information that is specific to local management of the
7E03-24 Module only.