Toshiba CM1910A User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of Contents
Troubleshooting.............................................................................................................................Back cover
Installing Your Video Monitor
Where to install
Place the monitor on the floor or on a sturdy platform. The mounting surface should
be flat and steady.
Lighting
Do not place the monitor in a room where direct lighting strikes the screen. Use soft
and indirect lighting.
Air circulation
Place the monitor far enough from the walls to allow proper ventilation. This will
prevent the monitor from overheating and avoid possible damage to the monitor.
Avoid dusty places too.
Power supply
Plug into an electrical outlet with standard household power (120 volt AC, 60Hz).
As a safety feature, the plug has one prong wider than the other, it will fit only one
way into a standard electrical outlet. If the plug will not fit
into the outlet, try turning it around. If the plug will not fit
either way, the outlet is probably old and non-standard.
You will need to have a new outlet installed by an
electrician.
DO NOT CHANGE THE SAFETY FEATURE OF THE PLUG.
Wide prong
3-