Troubleshooting, Manufactured by, Printed in indonesia – Toshiba CM1910A User Manual
Page 10: Toshiba
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Troubleshooting
Before calling a service technician, please check the following table for a possible
cause of the problem and some solution.
Problem
Solution
Monitor will not turn on
•
Make sure the power cord is plugged in, then press
POWER button.
No picture, no sound
•
Check cable connections.
No sound, picture OK
•
Try pressing VOLUME A button.
Poor picture, sound OK
•
Check cable connections.
•
Check if the impedance select switch is properly
set.
•
Adjust Picture menu.
Poor color or no color
Adjust TINT and /or COLOR in the Picture menu.
If you change the direction of the monitor while the
monitor is activated, the picture may suffer from
color shading. If so, turn off the monitor and allow
for about 30 minutes to cool, then turn on the
monitor again.
The picture should improve.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
9740 IRVINE BLVD., IRVINE, CA 92618-1697
TEL: (949) 583-3000
MANUFACTURED BY
P.T. TOSHIBA CONSUMER PROOUCTS INOONESIA.
Printed in Indonesia
(99-07)
TOSHIBA