Toshiba CM1320A User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation
Setting the impedance select switch
When the VIDEO OUT jack Is used to connect another video monitor, set the impedance
select switdi to HIGH (left) position.
When the VIDEO OUT jack is not used, set the switch to 75 (right) position.
nm
HIGH-75
VIDEO
Turning the Video monitor on
Press the POWER button to turn the video monitor on.
To turn the video monitor off, press the button again.
Adjusting the voiume
To increase the volume, press the VOLUME > button. To decrease the volume, pn
VOLUME < button. Press and hold either button until your desired volume level is
obtained.
DJJ-
6
The VOLUME < > buttons will operate as t
display is on the screen.
I menu < > buttons while the menu