Toshiba CM1320A User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing Your Video Monitor...................................................................... 3
Location of Controls...............................................................................4
Basic Operation................................................................................... 5
Adjusting the Picture.......................................................................... 6
Changing the On-Screen Display Language................................................... 7
Maintenance and Care............................................................................ 8
Specifications.......................................................................................8
Limited Warranty................................................................................ 9
Troubleshooting........................................ .... ............................ Back cover
Table of Contents_________________________________
Installing Your Video Monitor
Where
to install
Place the monitor on the floor or on a sturdy platform. The
mounting surface should be flat and steady. Use a sturdy tie
between the monitor hook on the back and the rear wall, pillar,
etc., to secure the monitor.
Lighting
Do not place the monitor In a room where direct lighting strikes the
indirect lighting.
Air circulation
Place the monitor far enough from the walls to allow proper ventilation. This)
monitor from overheating and avoid possible damage to the monitor.
Avoid dusty places too.
! prevent the
Power suppiy
Plug into an electifcal outlet with standard household power (120 volt AC, 60Hz).
As a safety feature, the plug has one prong wider than the other. It will fit only one
way into a standard electrical outlet.fif the plug will notflt intothe
outlet, try turning it around. If the plug will not fit either way, the
outlet is probably old and non-standard.
You will need to have anew outlet installed by an electrician.
DO NOT CHANGE THE SAFETY FEATURE OF THE PLUG.
Wide prong