Troubleshootin, Servicing your cb – Uniden PRO 500D User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshootin
If your PRO 500D is not performing up to your expectations, please try these simple
steps. If you still cannot get satisfactory results after reading this manual and fol
lowing the trouble shooting steps, please call the Uniden Australia Pty. Ltd. at
599-3355.
Ifyou determine that service is necessary, contact your local dealerorpack the unit
in its original carton and send it along with a brief, concise description of the prob
lem, your name, address, phone number, and a copy of the original purchase re
ceipt to the address listed in the warranty.
TROUBLE
CHECK
Unit will not turn on.
1.
Check power cord and all
No power.
connections.
2, Check power cord fuse.
3. Check vehicle electrical system.
Poor reception
I,
Check and adjust Squelch.
2.
Check antenna system, cable and connec
tors.
3.
Check operation mode of the radio.
Weak transmission
1.
Check antenna system, cable and connec
tors.
2
Check antenna grounding.
3.
Check for corrosion on connectors.
Servicing your CB
Technical information, diagrams and charts will be provided upon request. It is
the user's responsibility to see that this radio is operating at ail times in accordance
with the D.O.C. Citizens Radio Service regulations. We highly recommend that
you consult a qualified radiotelephone technician forserviceandalignment of this
radio. When ordering parts, it is important to specify the correct model number
and serial number of this radio.
Piease refer to the WARNING information on the first page of this manual.