Connect Tech SSD/104 - Manual (Page 5)

Connect Tech SSD/104 SATA User Manual
Revision 0.00 5
Introduction
The SSD/104 SATA is a complete rugged stackable storage solution. This product allows for up to two
mSATA SSD modules to be installed into any PC/104 stack or embedded type system.
This allows users to easily integrate a high performance, high capacity storage solution directly onto their
embedded PC/104 stack. This solution eliminates the need to use larger 2.5” magnetic or solid state drives,
while greatly reducing the overall storage footprint in your embedded system.
Because the SSD/104 SATA leverages installing the latest generation technology of modular mSATA SSD
modules, your systems capacity and performance can easily be upgraded as new modules are released.
Another benefit to using the SSD/104 SATA with mSATA SSD modules is that it directly interfaces to the
standard SATA bus and can be a drop-in replacement for any SATA type storage device.
The SSD/104 SATA can be interfaced to any SBC or embedded type system using standard 7-pin SATA.
As well as having the option for cable-free usage using the PCIe/104 Type 2 standard which passes the
SATA signals directly over the bus connector.
The SSD/104 SATA can purchased from Connect Tech as a complete storage solution with the mSATA
modules already installed or the product can also be purchased as a mSATA carrier in which case the user
can source and install their own mSATA SSD modules.