Specifications – Uniden GRANT User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SPECIFICATIONS
GENERAL
F.C.C. Type Number
Channels
Frequency Range
Frequency Control
Frequency Tolerance
Frequency Stability
Operating Temperature Range
Microphone
Input Voltage
Current Drain
Cabinet Dimensions
Weight
Antenna Connector
Semiconductors
Meter
Indicators
TRANSMITTER
Power Output
Modulation
Intermodulation Distortion
SSB Carrier Suppression
Unwanted Sideband
1005002
40AM, 40LSB, 40USB
26,965 to 27.405 MHz
Phase Locked Loop(PLL) synthesized circuitry.
0.005%
0
.
001
%
-20'Cto +50°C
Plug-in type; dynamic with push-to-talk switch
and coiled cord.
13,8V DC nominal, 15.9V max., 11,7V min.
{positive or negative ground).
Transmit: AM full mod., 3A maximum.
SSB, 12 watts PEP output, 3A
maximum.
Receiver: squelched; 0.5A, maximum audio
output 1A.
7-7/8"(W) x 2-3/8"(H) x 9-1/4"(D)
5 pounds
UHF, SO-239
44 transistors, 3 field effect transistors, 6 inte
grated circuits, 62 diodes and 3 light emitting
diodes.
Illuminated; indicates relative RF power output
and modulation on Transmit, received signal
strength,
LED display; channel, emergency channel and
TX/RX.
AM, 4 watts
SSB, 12 watts, P.E.P.
High and low level Class B, Amplitude Modula
tion.
SSB; 3rd and 5th order, more than -25 dB.
7th and 9th order, more than -35 dB.
More than -45 dB.
More than -45 dB,
-9-