Uniden UST-9000 - Manual (Page 3)

S 0 0SS 0
ÉM
0 0
Dll
D12 D14
D13 D15
Display
DI Indicates the relative strength of LED Level Meter
the satellite signal.
D2. Ku LED - Lights when Ku band is selected. C band
has no indicator.
D3. DNR LED - Lights when DNR function is selected.
'’(4. Narrow LED - Lights when narrow audio band is
selected. Wide band has no indicator.
D5. MPX, DISC, MTRX LEDs - Lights when these audio
modes are selected.
D6. Video Indicator - Lights when the video station
mode is selected.
D7. Lock LED - Lights when the memory lock is on.
D8. Sat. Position/Memory Ch - Displays the antenna
positon or preset station channel selected.
D9. Audio Indicator - Lights when the satellite audio
mode is selected.
DIO. Satellite - Displays the satellite letter and number
selected.
Dll. P.L. (Parental Lock) LED - Lights when a channel
has been selected that is locked.
D12. V and H LEDs - Lights to indicate vertical or hori­
zontal polarity.
D13. Channel - Displays the selected channel number.
D14. Stereo Indicator - Lights to show that the selected
audio is in stereo.
D15. Audio 1 and Audio 2 - Displays the selected audio
frequencies.
D16. Remote Window - Receives the infrared signal
from the handheld remote control.
Signal Meter Adjustment
Bottom Panel
Signal Meter Adjustment - If signal level on meter Is
consistently too high, adjust level by turning control with a
screwdriver.