Uniden BEARCAT UBC 70XLT - Manual (Page 9)

Trouble Shooting
If your UBC 70XLT is not performing up to
your expectations, try the steps listed below,
1. Scanner is not working properly.
A. Check the batteries or other power.
B. Check the Volume and Squelch,
C. Make sure programmimg is correct.
2. Signal is weak or distorted.
A. Check antenna connection.
B. Check proper frequencies.
C. Make sure frequency is active.
3. Improper Reception.
A. Check proper frequencies.
B. Reposition radio.
C. Check antenna connection.
4. Scan won't stop.
A. Check Squelch adjustment.
B. Check proper frequencies,
C. Check antenna connection.
D. Check Lockout.
5. Incomplete reception.
A. Fringe area of signal.
B. Check Squelch Adjustment.
6. Keypad won't work.
A, Check Keypad Lock.
7. Priority won't work.
A. Check Squelch adjustment.
B. Improper frequency in Ch. 1.
Optional Accessories
The following optional accessorie.s are avail­
able for your UBC 7()XLT.
UA 502 Vehicle Power Cord* - This power
cord is designed for use with the UBC
70XLT in a vehicle. The heavy duty cord
comes complete cigarette lighter connector
and fuse.
UA 502Л Coiled Power Cord* - The coiled
power cord keeps your vehicle interior neat
and elliminatcs tangled wires. The coiled
cord comes complete cigarette lighter
connector and fuse.
BP 70 Replacement Battery pack - The
UBC 70XLT battery pack is designed to
give years of trouble-free use. If it should
ever need to be replaced, simply order the
BP 70.
Flexible Rubber Antenna - Replacement an­
tenna for the UBC 70XLT.
*Use of a scanner in a vehicle may be regu­
lated or prohibited in some countries.
Check with your local authorities before op­
erating a mobile scanner.