Display, Hon lo api aux – Kenwood TK-290/390 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Display

SMMMMMM.

sc«

HON LO API AUX

*^(3)i)(5)(6)(z) (a)

® Alphanumeric display

Displays the operating group or
channel number, or the group or
channel name. When making a
DTMF or 2 Tone call, the display

will alternate between CALL and
the channel. Also displays
various menu functions,

d) 7 Segment display

Displays the operating group or
channel number. Also displays tA
(Talk Around), P1 (Priority 1), P2
(Priority2), or HC (Home
Channel); depending on the
function being used.

A (Add) Indicator

Appears when a channel Is
added to the scanning sequence.

0 SCN (Scan) indicator

Appears when Scan mode Is active.

Ф MON (Monitor) Indicator

Appears when the monitor
function Is active.

Appears when low power is
selected.

OPT Indicator

Appears when Operator
Selectable Tone Is enabled.

Appears when Aux is ON.
Appears and blinks when the
optional scrambler board Is
enabled.

Note: The alphanumeric and 7 segment
displays can be inverted if a PF key or the
toggle switch is programmed with Invert

Display

{page в}.