Czdcid, Display, Ch3 c3z3 – Bose CD Player User Manual
Page 17: Reading the radio, Using the i'adio function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the i'adio
Function
rrw
Remi >te
-c ontml
To turn the radio on/off - Press
On/Off
once to turn on or off. The
system turns on to the last source played. Or, press
FM
or
AM
or any
Preset
to turn the radio on.
@ ® ®
To seek a station - Press
Track/Tune
<] or [> once to tune In the
next strong station. Repeat to locate a station you prefer. After manually
tuning (see below), wait 2 seconds for the system to return to seek
mode.
CZDCID
- r ►
To manually tune in a station - Tap either
Track/Tune
<1 or [>
button quickly two or more times to tune the frequency In small steps.
Or, press and hold either
Track/Tune
<] or I> button until the desired
station Is reached. Then, you can press the button to adjust the fre
quency In small steps. After manually tuning, wait 2 seconds for the
system to return to seek mode.
Track/Tune
<
II >
To preset up to 6 AM and 6 FM stations - Use the
Track/Tune
buttons to find the desired station. Then,
on the control panel only,
hold
down any
Preset
button until the preset number lights. The station Is
now preset to that number.
CH3 C3Z3
To select a preset station - Change to
FM
or
AM,
If needed. Press
the
Preset
button for the station you want.
CZD fT~)
C33) ( ^
^ ]
© ®
To display the selected station - If the display Is In clock mode
and the radio Is on, press
FM
(to check FM station) or
AM
(to check AM
station). Or, If you are not sure of the band, hold down
Alarm Setup
and
press
Track/Tune
<1 or |>.
hold snd press
(.jq""' "] [
Reading the radio
display
Figure 10
An FM radio display example
Indicates FM is the
17