Bose Home Theater Speakers V-100 - Manual (Page 10)

Completing Your Surround Sound Setup
Use your receiver to vary the sound
To use the video speaker in surround sound mode, be sure
to set your receiver to NORMAL (Figure 8). That is important,
no matter what brand or model of receiver you own.
Different surround sound receivers select the various speak­
ers and adjust their volume In different ways. Some direct
sound to all channels during CD or tape operation, as well as
in the video mode. Others allow you to use the center and
surround (rear) channels only for video sound.
The owner’s guide that came with your specific receiver will
explain how to adjust sound coming from the center and
surround speakers.
Figure 8
The receiver or amplifier set
for NORMAL surround
sound mode
Test each speaker
Before testing for proper operation, plug your receiver or
amplifier into the AC power (mains) outlet and turn it on.
1. Set your receiver to NORMAL surround sound mode.
2. Refer to your receiver or amplifier owner’s guide and
follow the test procedure as described for that product.
If there is a problem with the speaker performance, check the
connections once more. Review “Connect the speakers” on
page 7.
10