For your information, Programming your cable or satellite box remote, Your new tv set is now ready – Vizio VXW20L User Manual

Page 2: Jizlo vxw20r hdtvquickstart guide, Pt"ional component's vizio

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

'JIZlO VXW20r HDTVQUICKSTART GUIDE

WHERE IJISION MEETS luiRLUE

Programming your TV to Receive and Dispiay Channels:

AM you need is your Remote Control.

□ Receiving Channeis through DTV/TV Input
using Reguiar Antenna or Regular Cable Service
(No Box) Signals.

STEP 1.1

O Connect your signal source (cable

from antenna or cable from the wall for

Cable Service without box) directly to
the DTVATV RF (commonly named

COAXIAL) connector.

STEP 1.2

OTurn on the TV. The Initial Setup

menu screen should appear. If this
screen does not appear see User's
Manual, Chapter 3 for TV Tuner Setup.

Press Q key to initialize the process.

Select Language: English, Espaflol, Français.

Press Q button to go to next screen.

Press Dor B once to select Cable or Antenna.

Press Q to continue to next screen.

Press Q key on remote control

to scan for channels. Scanning for
available channels could take
several minutes.

Once scanning isfinished, programming is

complete. Press the LAST key to exit.

B Displaying Channels from ciifferent Signal Sources (External TV Tuner, VCR, Cable Box
or Satellite Receiver) through different Inputs.

STEP 2.1

n®

Select the correct input connection; RF (DTV/TV)* connector. Composite (Yellow, Red and White)* connectors. Component (Red,

Green, Blue plus Red and White)* connectors, HDMI* connectors or S-VIdeo (AV)* plus Red and White connectors (If applicable).
Make the physical connection or hook up.

STEP 2.2

0 Turn on the TV. The Initial Setup menu screen should appear. If this screen does appear,

press Q on remote control to Initialize the process. If the screen does not appear,
please skip to Step D.

Select Language: English, Espanol, Français.

0 Press LAST key to exit the Initial Setup menu.

If you have an HD service you must use the HDMI (best) or Component connection.

NOTE: Composite and S-VIDEO Cables can only be used for 5D (4801) pictures.

Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there Is not a

picture, make sure you have selected the correct input on the TV set.

If the selected input is RF connection, you should be aware that the TV set needs to be on either channel 3 or channel 4 matching the

channel which has been selected on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver; please refer to Owner or
User's Manual of such equipment for details.

NOTE: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV
set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used includes a box
with two different outputs for two different (distant) rooms, then scanning channels should help to find the signal. Be aware that the channel to be
selected varies from provider to provider, meaning you may have to call your provider company so they can provide you with the specific channel to use
with hlgh-definltlon TV sets. Some examples of these channels are: 105,106, 115 and 116.

B Fine Tuning your TV for Home Use.

After completing either Procedure 1 or Procedure 2,
please follow the steps below to optimize your TV set display:

1. Press the MENU key to bring up the Menu display. Use

the

button to scroll to the Color Temperature option.

2. Press the Q button to select it.

3. Press either P or Q button to change setting to Normal,

and then press the LAST key again to go back to previous screen.

4. Press either

button to select the Picture Mode option.

5. Press either p or Q button to change the Picture Mode option

to Standard.

6. Press the LAST key repeatedly to exit the on screen display Menu.

NOTE: If you followed Procedure 1, take the following steps to ensure
that the correct program times are shown when pressing the Guide key:

Press the MENU key, which will bring up the picture mode menu.

Pressing either the p or Q button, scroll across to the Icon showing the

little satellite dish or antenna.The next screen will appear showing

Time Zone; using either the

button, select it, and finally by

pressing either the p or Q button, choose the proper Time Zone for your

area. Press the LAST key repeatedly to exit the on screen display Menu.

For Your Information:

0 Coaxial connection (RF connector) is recognized as the threaded connector, commonly
called cable, screw on or coaxial connector which carries the image (picture) and sound
(audio) through a single cable.

0 Composite connection (RCA connectors) is recognized by the three (yellow, red and
white) standardized color coded RCA connectors. Yellow carries the image (picture); red
(right channel) and white (left channel) carry the sound (audio) of the signal.

0 Component connection (RCA connectors) is recognized by the three (green, blue and
red) standardized color coded RCA connectors for image (picture) plus the two (red and
white) standardized color coded RCA connectors for the sound (audio) of the signal.

0 HDMI (High-Definition Multimedia Interface) connection (HDMI connector) is
recognized by the standardized elongated D-Shaped connector which carries both the
image (picture) and the sound (audio) of the signal through a single cable.

0 S-Video (separate video) connection (4-pin Mini-DIN connector) is recognized by the
small connectors at the end of a cable with multiple pins in it. This connection carries only
the image (picture) of the signal; therefore, there is a need to supply a separate sound
(audio) signal by using the two (red and white) standardized color coded RCA connectors.

Programming Your Cable or

Satellite Box Remote

Consult your Cable or Satellite Owner's Manual to determine if you

need a 3, 4 or 5-digit code. If your Cable or Satellite Box requires:

• 3-digits, please use "627" (This code usually works with DISH Network.)

• 4-digits, please use "1758", "0178" or "0128"

• 5-digits, please use "11758", "10178" or "10128" (These codes usually work

with DIRECTV.)

Your new TV set is now ready

to automatically reproduce the best picture quality from the input

signal being fed into it. Enjoy your VIZIO HDTV.

□pt"ional Component's

VIZIO

CERTIFIED

ENHANCE YOUR VIZIO EXPERIENCE

When it comes to components and accessories, don^t settie for

iess than VIZIO. We offer a fuii line of products specificaily

designed to accentuate your VIZIO HDTV.To iearn more about

how you can enhance your VIZIO experience, cail 888-849-4623

or visit www.VIZIO.com.

VIZIO HlGH-DEFlNlTION CERTIFIED CABLES

Our VIZIO Certified HD cabies carry the same standards of

exceiience as ali our VIZIO products. Available in: DVI, HDMI

and Component in lengths of 2,5, and 10 meters.

VIZIO CERTIFIED MOUNTS

FLUSH MOUNT- turn your HDTV into a work of art

TILT MOUNT-adjust your HDTV for the most comfortable

viewing position

ARTICULATING ARM- position your HDTV exactly where

you want it