Kenwood CAW1035-01 - Manual (Page 7)

DODGE RAM SOOB
WITH IVIIIMI CEIMTER CDIMSDLE
1 Disconnect the negative battery terminal
to prevent an accidental short circuit.
2 If vehicle has floor shifter, remove shifter
knob.
3 Remove center console inserts, if present,
(Figure A)
4 Remove screws securing the rear center
console to the floor panel. Lift up on the
rear center console to clear the gear shift
lever, if present. (Figure B)
5 Remove screws securing the front center
console to the floor panel. Unclip and
remove the front center console.
(Figure C)
6 Remove two phillips head screws at bottom
of dash, Unsnap and remove lower panel.
7 Remove (2) Phillips screws facing up on
front edge of radio/climate control panel.
(Figure D)
8 Unclip and remove entire panel sur­
rounding radio and climate controls,
including a/c vents, (Figure E)
9 Remove (4) 7MM screws securing radio
to dash and remove radio.
10 (Continue to kit assembly.