B cannectir n < ur vcr or, Pc computer – Vizio VX32L User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.B Cannectir n < ur VCR or
VIZIO VX32L HDTV10A User Manual
1.
Turn off the HDTV and VCR or Video Camera.
2.
Connect the S-Video jack on the rear of your VCR
or Video Camera to the S-Video jack in the AV1
group on the side of the HDTV.
3.
Connect an audio cable (white and red connectors)
cable to the audio output connectors associated
with the S-Video output on your VCR or Video
Camera and connect the other end to the audio
connectors associated with the AV1 input on the
......
side of the HDTV.
' \ j '....................................... ’
4.
Turn on the power to the HDTV and VCR or Video Camera.
5.
Select AV1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
Note: Refer to your VCR or V:deo Camera user manual for more
information about the video output requirements of the product
I
HDMS
1
2
PC Computer
1.
Turn off the power to the HDTV and PC Computer.
2.
Connect a 15-pin D-Sub RGB (VGA) cable to the RGB
output of your pc computer and the other end to the
RGB PC input (blue area) at the rear of the HDTV.
3.
Connect the Audio Cut on your pc computer to the RGB
PC Audio input (blue area) at the rear of the HDTV.
4.
Turn on the HDTV and PC Computer.
5.
Select RGB using the INPUT button on the remote or
side of the HDTV, or directly by pressing the RGB
button on the Remote Control.
/■
Note:
: I ■ ■-Ta):;
■b):
For the best picture quality wnen connecting a pc computer through RGB
PC. set your pc computer timing mode to VESA 1366x768 at 60Hz. Please
refer to the pc or graphic card s user guide for additional nformation on now
to set the timing mode and the v deo output requirements of the product.
A RGB (VGA) cable and stereo min; jack cable are not included and can be
purchased at an electronics store.
y
Version 3/13/2007
22
0