Cortelco Medallion 3220 User Manual
Page 16
Flash can also be used when storing numbers in memory locations to transfer a call to
a new extension.
HEADSET COMPATIBLE
This telephone will accept a 2.5 mm cell phone-style headset.
RELEASE BUTTON
To end a conversation, press the RELEASE button once.
VOICEMAIL BUTTON
Press the VOICEMAIL button to dial the voicemail access number and pin. See section
under “Unit Setup” for details.
DIRECTORY BUTTON
The directory button is used to store the name and number of up to 99 of your most
frequently dialed contacts. The Names are sorted alphabetically.
CONFERENCE BUTTON
1
To establish a 3-way conference, press HOLD while talking on one line. The first
conference person is on HOLD.
2
Press Line 1 or Line 2 whichever is not in use. Listen for dial tone. Dial the
telephone number of the second person.
3
Press the conference button. You may now speak to the first and second person
simultaneously. To place both calls on hold, press the hold button while in confer
ence. To cancel hold for one line, press the desired line.
4
Replace the handset in the cradle to disconnect both lines. To stay connected to
only one line, press the desired line. The other line will be disconnected.
5
After conference call, press Line 1 or Line 2 to cancel conference call.
CALL WAITING DISPLAY
In the past, if you had call-waiting service, a tone alerted you there was a new call
coming while you were on an existing call. Now our Call Waiting Caller ID not only tells
you there is another call waiting, but lets you know who the caller is before you answer
it. The call waiting information will be shown on the unit’s display.
The CALL WAITING (CW) symbol will flash for 16 seconds along with the telephone
number and name of the person who is on call waiting. Press the FLASH button to put
the existing call on hold and answer the new call.
Whether or not you answer the call, the Call Waiting Caller ID will store the call informa-
tion for future reference.
10
Note: Make sure you have sub-
scribed to both Call Waiting Caller
ID and Caller ID service from your
local telephone company. If you only
have Caller ID service, the unit works
for Caller ID only.