Cortelco Medallion 3220 - Manual (Page 11)

10. When [#3 SEC PAUSE] appears, enter the desired number of pauses using the
keypad. After the desired setting has been entered, press MENU to confirm selec-
tion.
11. When [VM PASSWORD] appears, enter the desired password using the keypad
(maximum of 5 digits). To delete a number or digit, press the REVIEW DOWN ( )
button to erase the number(s). After the desired number has been entered, press
MENU to confirm selection.
12. When [ EDIT TIME & DATE ] appears, enter the time using the keypad, press the
REVIEW UP ( ) button and REVIEW DOWN ( ) button to select AM or PM.
Enter the date using the keypad. Press MENU to confirm the settings.
Example: To enter 8:35 AM, enter 0835 and then press the REVIEW UP (
)
button to skip to the date because the time is AM by default.
13. When [RINGER CADENCE] appears, the default setting is 4 for line 1 and 3 for line
2. To alter this setting, press the REVIEW UP ( ) button, there are 5 ringer
cadences and each one will be played as you scroll through them. After the
desired ringer cadence is displayed, press MENU to confirm selection.
14. When [RINGER VOLUME] appears, the default setting is 5 for Line 1 and 2. To
alter the ringer volume, press the REVIEW UP ( ) button, there are 7 ringer volume
levels and each one will be played as you scroll through them. To turn the ringer
off, select OFF in the Menu. After the desired ringer volume level is displayed,
press MENU to confirm selection.
15. When [STUTTER TONE] appears, the default setting is “NO”. To toggle stutter tone,
press “1” for YES or “2” for NO. Press MENU to confirm selection and exit unit
setup.
** To re-enter the menu after exiting the initial setup, press and hold the OPTION/MENU
button.
5