Channel Vision IR Receiver IR-5000 - Manual (Page 2)

Drill a 3/4” . hole
Push the IR receiver head
through the hole.
Push the IR receiver head
through the hole in the
tabletop mount.
Mount the IR receiver to the TV or on a surface within line of sight
of your remote control.
Remove the backing from the tape and attach the
IR receiver holster in the desired location.
Remove the backing from the tape and attach the
IR emitter holster over the IR sensor of the device
you wish to control.
Snap IR receiver head into the holster
as shown.
Snap IR emitter into the holster
as shown.
Push the IR receiver hole
mount and IR receiver head
back into the hole.
Push the IR receiver hole
mount and IR receiver head
back into the hole in the tabletop
mount.
To secure the mount, remove
the backing from the foam tape
on the bottom of the unit and
attach the mount to any flat surface.
Insert the IR receiver head
into the IR receiver hole mount.
Insert the IR receiver head
into the IR receiver hole mount.
CD player
Mounting the IR receiver: Option 1 - Using the holster
Mounting the IR receiver: Option 3 - Using the tabletop mount Mounting the IR receiver: Option 2 - Using the hole mount
Mounting the IR emitter