Crate Amplifiers BV-50H - Manual (Page 8)

Technical Specifications:
Output Power Rating 50 watts RMS nominal @ 5% THD
Input Impedance 1M ohm
Ch. 1 Ch. 2
System Gain 66dB 95dB
Tone Controls Low 16dB range @ 100Hz Low 6dB range @ 100Hz
Mid 23dB range @ 300Hz Mid 13dB range @ 700Hz
High 25dB range @ 10kHz High 12dB range @ 10kHz
Presence Control 5dB boost @ 10kHz
Effects Send/Return Level 0.7V RMS nominal
Line Out Level 0.4V RMS nominal, unloaded
Tube Complement 12AX7 (3), 6L6 GT/5881 (2)
Power Requirements 115V 60Hz, 110VA; 2.5A Slo-Blo Fuse
Size and Weight 10”H x 20”W x 10-1/2”D, 34lbs.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
The BV-50H is covered with high-quality, durable Tolex ® . To keep it looking its best, avoid abrasive cleansers.
Wipe the cabinet clean using a slightly dampened soft cloth. Do not spray cleaners directly into the amplifier.
Never use brass cleaners on the hardware since they could damage their protective coatings.
®
©1996 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
P/N 47-584-51 • 10/96
®
BV-50H Guitar Amplifier