Casio QV-10A - Manual (Page 14)

53
Playing Back Images
Producing a Multi-Page Display
Four or nine memory pages can be displayed at the same time. This
feature can be used to display multiple memory pages on the
camera’s built-in LCD, or on the screen of a connected TV.
1.
Enter the Playback Mode and turn on the camera.
2.
Switch to multi-page display.
• P r e s s t h e M O D E b u t t o n t o
change between the different dis-
play formats.
• Each press of MODE changes the
display format in the following se-
quence.
* The memory page that is shown on the screen when you
change to the 4-page or 9-page format is in the first (upper
left) position in the multi-page display.
Operation
54
3.
Scroll through the pages on the display.
• Use [+] (forward) and [–] (back) to scroll through the memory
pages. Pages are scrolled one, four, or nine at a time, de-
pending on the display format you are using.
Unused pages are colored gray.
Note
• The brightness of the images on a multi-page display may differ
slightly from the brightness when a single image is shown. This is
because the camera automatically uses the brightness setting for
the brightest image contained in the multi-page display for all of the
images.
55
Playing Back Images
In this example, we will select this page.
Selecting a Memory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.
1.
In the Playback Mode, press the MODE button.
• This changes to the 4-page dis-
play.
2.
Press the DISP button.
• This causes a white line to appear
under the first (upper left) page.
This white line indicates the
memory page that is currently se-
lected.
• If you do not perform any opera-
tion for about 10 seconds, the
white line disappears from the dis-
play.
Operation
56
3.
Move the white line to the memory page that you want to
select.
• Press [+] to move the line to the
right or [–] to move it to the left. In
this example, press [+] three
times or [–] once.
4.
Press the ZOOM button.
• T h e i m a g e i n t h e s e l e c t e d
memory page appears as a 1-
page display.
X 3