beautypg.com

Cleaning, care and maintenance, Iced tea, Keep warm mode – Cuisinart PerfecTemp Programmable Tea Steeper & Kettle TEA-100 User Manual

Page 7: Boil-dry protection, Decalcification

background image

ICED TEA

Any tea can be iced. Simply increase the

amount of tea and steep for the

recommended time (see our recipe on page

11). Once steeped, make sure your unit is

no longer heating or in Keep Warm mode,

and remove the steeping assembly. Add ice

and/or cold water up to the top of the glass

and cover with the kettle lid for serving. You

can put the kettle in the refrigerator for

additional cooling, or serve immediately

over ice.

KEEP WARm mODE

Keep Warm is the unit's default option that

automatically maintains your selected

temperature for 30 minutes.
If instead you would like your unit to turn off

after steeping, Keep Warm can be turned

off (or back on) at any time before entering

Keep Warm mode by pressing the Keep

Warm button. When the indicator light

is on, the function is selected.
Once your unit has entered Keep Warm

mode, the time can be adjusted by pressing

the Keep Warm button, scrolling through 5

to 30 minutes. To turn the unit off at any

time, press the power button.
NOTE: If temperature selected was Boil,

a temperature just below the boiling point

will be maintained.

mEmORy fEATURE

The unit features an internal memory that

lets you remove the kettle from the base for

up to 2 minutes without the unit shutting off.

Instead, heating or Keep Warm will be

paused. Lights will flash while the kettle is

off the base. When the kettle is returned to

the base the cycle will resume from where it

left off.

BOIL-DRy PROTECTION

Your unit is equipped with boil-dry

protection. If it is heating without enough

water in the unit, the heater will

automatically shut off to avoid damaging

the element. All indicators will flash and

buttons will not work.

Once the kettle has cooled down, lift

it off the base, then replace it to reset.

The quickest way to cool the unit down

is to fill the kettle with cold water.

CLEANING, CARE AND

mAINTENANCE

Unplug your unit and allow it to cool before

cleaning. Rinse the kettle or wash with

warm soapy water. Wipe the outside of the

kettle and base of unit with a soft, damp

cloth. Be sure that the electric kettle socket

is kept dry during all cleaning.
Steeping Assembly and Kettle Lid – You

can wash in warm soapy water and rinse

thoroughly, or place on the top rack of the

dishwasher.
Removable Spout filter – This kettle has
a filter to keep the water/tea clean. Remove it
to clean by grasping and pulling upward. Run
filter under hot water and rub with a clean
cloth or brush, then snap it back into place.
Dry all parts after every use.
Never immerse kettle or power base in

water. Any other servicing should be

performed by an authorized service

representative.

DECALCIfICATION

Decalcification refers to removing mineral

deposits, which may form in the interior of the

kettle and may result in discoloration.
To get the best performance from your unit,

decalcify your unit from time to time. Frequency

will depend on the hardness of your water and

how often you use the unit.
We suggest using a kettle descaler in order to

dissolve these deposits or scale. Follow the

directions on the descaler package.
If a commercial descaler is not available,
fill the kettle with enough white vinegar to cover
the bottom by about ½ inch. Heat
the vinegar to a boil. Repeat this with cooled
vinegar until all deposits are removed. When the
descaling process is complete, empty the kettle
and rinse out several times with clean water.

6