Cary Audio Design DVD 8 - Manual (Page 29)

PLAYBACK
28
STARTING A DISC
1. Turn on the Power.
• Press the power button, the power turns ON and the standby indicator lights turns
OFF.
• When in standby mode, press the POWER button on remote control unit to turn the
player ON.
2. Press the OPEN button to open the disc tray.
3. Place the disc in the disc tray.
4. Press the OPEN button a second time to close the disc tray.
• For many interactive DVDs and video CDs with playback control, a menu screen
appears. In this case use the procedure in Step F to select the desired item.
• Interactive DVDs are DVDs that include multiple camera angles, alternate endings for
stories, and other extras.
5. Press the PLAY button.
6. Use the UP , DOWN , LEFT , and RIGHT cursor buttons to select the desired
item.
• For some discs there is a second menu screen. If so, press the
button to display
the next menu screen. (See the disc's jacket for availability)
• The cursor buttons ( , , and ) do not work for video CDs. Instead, use the
number buttons to select the desired item.
7. Press the ENTER button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the MENU/TITLE button while the DVD
is playing, though this depends on the disc.
• Press the PLAY button during playback of a video CD to return to the menu screen.
STOPPING PLAYBACK
1. During playback, press the STOP button on the main unit or the remote control unit.
Playback will stop and the wallpaper is displayed.
2. Resume play memory function. (DVD only)
3. With the DVD 8, when the STOP button is pressed, that position is stored in the memory.
At that time, "PLAY" flashes on the display. When the PLAY button is pressed, playback
resumes from the position where it was stopped. The resume play memory function is
cancelled if the disc tray is opened or the STOP button is pressed a second time.
4. If you do not want to continue playing the disc or to save electricity press the POWER
button on the main unit to turn the power off or press the POWER button on the remote
control to set the power to the standby mode.