Crestron electronic infiNET EX MLX-2 - Manual (Page 13)

Crestron MLX-2 infiNET EX™ LCD Handheld Remote
Display Timeout
From the “BASIC SETUP” screen, press one of the menu buttons on either side of the
DISPLAY T/O menu option to select the display timeout setup function. This
function sets the number of seconds of inactivity before the screen display is turned off
(during normal operation, not in Setup mode).
Display Timeout Setup
-DISPLAY T/O+
SAVE
PAGE 1/1
- 5.0 +
SAVE
PAGE 1/1
Display Timeout
successfully
adjusted. Press
> to continue.
PAGE 1/1
Press one of the menu buttons on either side of the –DISPLAY T/O+ display to show
the current setting value. Use the menu buttons to adjust the timeout value. The range
is from MIN Timeout + (1 second), to - MAX Timeout (30 seconds) in 0.5 second
steps. Default setting is 5.0 seconds. When the desired setting is reached, press a menu
button on either side of the SAVE menu option to accept the setting. The screen
display confirms the adjustment. Press h to continue. The display returns to the
“BASIC SETUP” screen.
Backlight Timeout
From the “BASIC SETUP” screen, press one of the menu buttons on either side of the
LIGHT T/O menu option to select the backlight timeout adjustment function. This
setting determines the number of seconds of inactivity before the backlight is turned
off. It affects both the button backlight and the screen backlight. This setting applies in
Setup mode as well as during normal operation.
Backlight Timeout Setup
- LIGHT T/O +
SAVE
PAGE 1/1 PAGE 1/1
- 5.0 +
SAVE
Backlight Timeout
successfully
adjusted. Press
> to continue.
PAGE 1/1
Press one of the menu buttons on either side of the – LIGHT T/O + display to show
the current setting value. Use the menu buttons to adjust the value. The range is from
Light Off + (0.0 seconds), to -MAX Timeout (30 seconds) in 0.5 second steps. The
default is 5.0 seconds. When the desired setting is reached, press a menu button on
either side of the SAVE option to accept the setting. The display confirms the
adjustment. Press h to continue. The display returns to the “BASIC SETUP” screen.
Once you are finished with the basic setup functions, press the HOME key to return to
the “PROGRAM DEVICE” screen.
Operations Guide – DOC. 6839A infiNET EX™ LCD Handheld Remote: MLX-2 • 9