Installation – Sharp AF-S80RX User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION INSTRUCTIONS
INSTALLATION
WARNING: Make sure the unit is turned off and unpiugged before instaiiing.
1
Cut the window sash foam seal (adhesive
type) to the proper length and attach it to
the underside of the window sash.
Jamb
Sash
Window sash foam seal
(adhesive type)
Remove the air conditioner from the
carton and place on a flat surface.
Remove the top rail from the bottom
of the packaging material as shown in
FIG. 1A
Align the hole in the top rail with those in
top of the unit as shown in FIG. 1B
The higher flange should be toward the
front of the air conditioner.
Secure the top rail to the unit with the ^ /.
Screws as shown in FIG. 1C
FIG. 1B
FIG. 1C