Gt-500h – Crate Amplifiers GT-500H User Manual

Page 8

Output Power Rating

50W RMS @ 10% THD, 8 ohm load, 120 VAC

Input Impedance

1M ohm

Maximum Signal Accepted

2.8V peak to peak

Signal To Noise Ratio

Channel B:

52dB

Channel A:

58dB

Gain

Channel B:

75dB

Channel A:

68dB

Tone Control Range

Channel B:

Bass:

12dB, 60Hz

Mid:

10dB, 600Hz

Treble:

7dB, 4kHz

Channel A:

Bass:

20dB, 70Hz

Treble:

16dB, 2kHz

Line Out Level

375mV RMS @ full power output

Tube Type

Preamp: (4) 12AX7 Power Amp: (4) EL84/6BQ5

Power Requirements

120VAC, 60Hz, 110VA
100/115VAC, 50/60Hz, 110VA
230VAC, 50/60Hz, 110VA

Size and Weight

11”H x 21.25”W x 11.25”D, 35 lbs.

P/N 47-547-12 • 02/98

TECHNICAL SPECIFICATIONS:

The GT-500H is covered with a durable black Tolex

material. To keep the cabinet in top condition,

wipe it clean with a damp lint-free cloth to remove dirt and road film. Never spray cleaning agents

directly onto the cabinet, and stay away from abrasive cleansers which could damage the finish.

Crate continually develops new products, as well as improves existing ones.

For this reason, the specifications and information in this publication

are subject to change without notice.

GT-500H

Amplifier