Camco Q-Power 10 - Manual (Page 24)

6 SPECIFIC
ATIONS
USER MANUAL
Q - P O W E R S E R I E S P. 23
Q - P O W E R
S E R I E S
Q-POWER 6 Q-POWER 10
THD+N (typical)
20 Hz - 0 kHz, 8 Ω,
dB below rated power
< 0,03 % < 0,05 %
Damping Factor
8 Ω, kHz and below
> 350 > 600
Maximum output voltage 25 Vp / 250 Vpp 45 Vp / 290 Vpp
Input Impedance 5 kΩ balanced
Voltage Gain selectable: 26 dB, 32 dB, or ,4 V input sensitivity
Protection Circuits inrush-current limitation, mains voltage monitoring, temperature monitoring of transformers and heat-
sinks, output DC protection, SOA protection, output over current protection,
intelligent mains fuse protection,
Limiter two individually selectable clip limiters for channels A + B and C + D
Fan two temperature dependent speed-controlled axial fans
Indicators LEDs for on, signal/protect, output current and clip
User Interface four individually adjustable volume control knobs for channel A - D
Input Connectors 3-pin XLR connector per channel
3-pin Euroblock connector per channel
Output Connectors two four-pole SPEAKON-connectors and barrier-strip-connector terminals for channel A - D
Dimensions (WxHxD) 483 x 88, x 42 mm (9”, 2U)
Net Weight 0,6 kg ,5 kg
Shipping Dimensions (WxHxD) 65 x 35 x 540 mm (0,045 m 3 )
Shipping Weight 2,6 kg 3,5 kg
We reserve the right to make technical alterations without prior notice.