Pioneer BCS-HW919 User Manual
Base plate installation manual (sme4002-a)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Base Plate Installation Manual (SME4002-A)
Applicable models: S-HV600B/BCS-HW919/HTZ-BD91HW/HTZ-HW919BD
Base plates x2
Packings x2
Non-skid pads (for front) x6
Installation Manual (this document)
■ Assembly Instructions
1 Remove the original non-skid pad
from the bottoms of the legs.
Peel off the other half of protective
paper and insert the base plate into
the holes in the bottom of the leg.
CAUTION
When installing the base plate be sure to
orient the plate correctly toward front and
back.
4
Affix
the
furnished
non-skid
pads
to the bottom of the base plate as
shown.
Peel off one half of the protective
paper
from
one
of
the
packings,
and affix the packing to the bottom
of the leg.
(for front)
3
2