Kenmore 437.85264 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETUP ____________________________________________
Your Electrostatic Air Cleaner was thoroughly inspected and tested at the
factory prior to packaging. Visually inspect it upon removal from the box.
Remove and discard any packing material. Return the unit if it shows any
signs of damage or mishandling.
Contents:
_______ _
• Electrostatic Air Cleaner
• 2 Protective Screens (Only used when cleaning the Collecting Cell in a
dishwasher...see pg.
12)
Place air cleaner near a power outlet, and avoid using an extension cord.
Lock the caster wheels to prevent the air cleaner from moving.
ELECTRICAL HOOKUP
Plug the Electrostatic Air Cleaner into a properly grounded,
3-prong household AC outlet. If you are not sure whether the outlet is
properly grounded, have it checked out by a qualified electrician.
WARNING! To avoid the risk of fire or electric shock hazard,
the Electrostatic Air Cleaner should ONLY be plugged into a
properly grounded 3-prong, 120-Volt AC outlet.
A
CAUTION: NEVER operate the Electrostatic Air Cleaner
until it is completely and fully assembled. Permanent
damage could result to the motor and controls.
Your Electrostatic Air Cleaner
is equipped with 4 casters for
portability. Use the locking levers
to help keep the air cleaner in place.