Kenmore 437.85264 - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS
Please read all instructions before using this product. Save these
instructions for easy reference. When using electrical appliances, basic
precautions should always be followed to reduce breakage, risk of fire,
electric shock and injury to persons including the following.
• Read all instructions before operating the air cleaner.
• Place the air cleaner where it is not easily knocked over by
persons in the household.
• ALWAYS unplug air cleaner when not in use.
• DO NOT use any product with a damaged cord or plug, or if
product malfunctions, is dropped or damaged in any manner.
• Keep the power cord away from heated surfaces.
• DO NOT use air cleaner outdoors.
• NEVER use the air cleaner unless it is fully assembled.
• DO NOT run power cord under carpets and DO NOT cover
with throw rugs. Arrange cord so it will not be tripped over.
• DO NOT use air cleaner where combustible gases or vapors are present.
• DO NOT expose the air cleaner to rain, or use near water,
in a bathroom, laundry area or other damp locations.
• To disconnect air cleaner, first press Power Button to turn air
cleaner OFF and remove plug from outlet.
• DO NOT allow foreign objects to enter ventilation or exhaust opening, as
this may cause electric shock or damage to the air cleaner. DO NOT
block air outlets or intakes.
• Place air cleaner near a power outlet, and avoid using
an extension cord.
• To reduce the risk of electric shock, this equipment has a grounding type
plug that has a third (grounding) pin. This plug will only fit into a grounding
type power outlet. If the plug does not fit into the outlet, contact qualified
personnel to install the proper outlet. Do not alter the plug in any way.
• The air cleaner has a 3-prong (grounded) plug for safe
operation. The 3-prong plug should be plugged directly into
a properly grounded 3-prong electrical outlet. DO NOT, FOR
ANY REASON WHATSOEVER, CUT OR REMOVE THE
GROUNDING PRONG FROM THE PLUG. Removing the
grounding plug may result in electric shock or create unsafe
condition. Contact a qualified electrician to be sure the outlet is
properly grounded.
• A loose fit between the plug and the AC outlet (receptacle)
may cause overheating and distortion of the plug. Contact
a qualified electrician to replace loose or worn receptacles.
• DO NOT sit, stand or place heavy objects on the air cleaner.
• ALWAYS disconnect power supply before servicing.