Chauvet 700 - Manual (Page 7)

Hurricane™ 700 User Manual (Rev. 08) Page 7 of 12
Mounting
Orientation
The Hurricane™ 700 may be mounted in any position, provided there is adequate
room for ventilation around it.
Rigging
Be sure that the structure or surface on which you are mounting this product can
support its weight and operating temperature. Please see the “Technical
Specifications” section of this manual for weight information. Refer to the following
notes on rigging.
 Make sure to mount the product securely to a rigging point, whether an
elevated platform or a truss.

When rigging this product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is
appropriate for this purpose.

When mounting this product overhead, always use a safety cable.
 Before deciding on a location for this product, always make sure that it will
be easy to access the unit for maintenance and programming purposes.
 The bracket knobs allow for directional adjustment when aiming the product
to the desired angle. Only loosen or tighten the bracket knobs using your
bare hands. Using tools could damage the knobs.
Mounting Diagram
Bracket knob
Rubber feet
Hanging bracket